A Normal Force on the Free Surface of a Coated Material

The three-dimensional theoretical solution of a concentrated normal force acting on the free surface of a coated material has been deduced by applying the reflection method. It is found that all stress functions defined in the local coordinate systems with their origins placed at each mirror point can be deduced from the fundamental solution of a concentrated normal force acting on the free surface of a semi-infinite homogeneous medium. The structure of the elastic solution has been illustrated by numerical analysis. It is found that only the stress functions corresponding to the first few mirror points are influential. It is also found that the effect of material combination on the stress field shall be described by three parameters, the two Dundurs' parameters and one additional parameter.     

Transition from the hierarchical distribution to a homogeneous formation in injection molded isotactic polypropylene (iPP) with dynamic mold temperature control

There is an increasing demand to produce injection molded thermoplastic parts with high performance and more uniform microstructure. In this study, an injection mold with dynamic mold temperature control was developed to create a thermo-mechanical environment in which a high mold temperature and slow cooling rate were retained. Two-dimensional wide angle X-ray diffraction (2D-WAXD) and polarized optical microscopy (POM) studies were carried out to investigate the morphological distribution of isotactic polypropylene (iPP) through the depth. Due to the fast relaxation of polymer chains at a high temperature, the macroscopic orientated structure of iPP in conventional injection molding was eliminated, that is transited from the hierarchical morphology distribution to a more homogeneous formation. A homogeneous appearance without layer boundary was shown and many radial spherulites with loosely packed lamellae distributed uniformly throughout the sample.     

Accessing Tunable Afterglows from Highly Twisted Nonaromatic Organic AIEgens via Effective Through-Space Conjugation

Nonaromatic, cross-conjugated, and highly twisted luminogens consisting of acylated succinimides demonstrate aggregation-induced emission characteristics along with tunable multicolor photoluminescence and afterglows in their single crystals. Effective through-space conjugation among different moieties bearing n/π electrons promote the spin–orbit coupling and intersystem crossing and lead to diverse emissive clusters with concurrently rigidified conformations, thus allowing readily tunable emissions. Derived from it, the proof-of-concept application for advanced anti-counterfeiting is illustrated. These results should spur the rational design of novel nonaromatic AIEgens, and moreover advance understandings of the non-traditional intrinsic luminescence and the origin of tunable multicolor afterglows.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofu-based scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofu-based scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Comparison of typical mega cities in China using emergy synthesis

An emergy-based comparison analysis is conducted for three typical mega cities in China, i.e., Beijing, Shanghai and Guangzhou, from 1990 to 2005 in four perspectives including emergy intensity, resource structure, environmental pressure and resource use efficiency. A new index of non-renewable emergy/money ratio is established to indicate the utilization efficiency of the non-renewable resources. The results show that for the three mega urban systems, Beijing, Shanghai and Guangzhou, the total emergy inputs were 3.76E+23, 3.54E+23, 2.52E+23 sej in 2005, of which 64.88%, 91.45% and 72.28% were imported from the outsides, respectively. As to the indicators of emergy intensity involving the total emergy use, emergy density and emergy use per cap, three cities exhibited similar overall increase trends with annual fluctuations from 1990 to 2005. Shanghai achieved the highest level of economic development and non-renewable resource use efficiency, and meanwhile, lower proportion of renewable resource use and higher environmental pressure compared to those of Beijing and Guangzhou. Guangzhou has long term sustainability considering an amount of local renewable resources used, per capita emergy used, energy consumption per unit GDP and the ratio of waste to renewable emergy. It can be concluded that different emergy-based evaluation results arise from different geographical locations, resources endowments, industrial structures and urban orientations of the concerned mega cities.     

Partitioning and transformation behavior of selenium during coal combustion

The partitioning of selenium in coal-fired flue gas and desulfurization wastewater is of great threat to the ecological environment and human health. However, the unclear understanding of interactions between selenium vapors and fly ash hinders the emission control of selenium from coal-fired power plants. To further illuminate the mechanism of selenium partitioning and transformation, this study carefully estimated selenium distribution characteristics in the coal combustion byproducts from several industrial power plants. The effective temperature range as well as the key ash components for selenium retention by fly ash was clarified by multiple-scale experiments and theoretical perspectives. The results showed that gaseous selenium tended to be captured by fly ash at a medium-to-low temperature range (i.e. below 650 °C). The limited residence time resulted in the incomplete capture of gaseous selenium by fly ash. Mullite, quartz, iron oxides, and anhydrite in fly ash were found to be the main trappers for gaseous selenium. Among these components, iron oxides showed excellent selenium adsorption performance at a wide temperature range of 150-700 °C, which was realized by the strong chemical adsorption. By contrast, as the dominant phases in fly ash for the physical adsorption of gaseous selenium, mullite and quartz mainly captured gaseous selenium below 300 °C. On the other hand, sulfur dioxides had priority over gaseous selenium to react with calcium-containing ash components by forming anhydrite in the high-temperature region. The formed anhydrite had a limited selenium adsorption capacity, which was confirmed to capture gaseous selenium through a combination of physical adsorption and weak chemical adsorption. For the in-depth control of selenium emitted into desulfurization system and atmosphere environment, these findings provided a comprehensive insight into the behavior of selenium partitioning and transformation into fly ash during coal combustion.